| I just purchased a Colorado Blue Spruce tree and would like to know how to plant it in the ground. What fertilizer do I use?
|I won't recommend a fertilizer for use this time of year, but next spring, after new growth begins, you can use a granulated fertilizer formulated for conifers (in amounts as suggested on the package). Here are some basic tree planting guidelines:
Select a site that is in full sun. Dig the hole twice as wide as the root ball (container), and no deeper than the height of the root ball. The soil that you dig out of the hole is what you use to backfill around the root ball. No soil amendments are recommended when planting a tree; therefore, no compost, peat moss, or shredded pine bark should be added to the backfill.
After planting the tree, build a 4-inch tall berm around the edge of the hole. Fill the berm with a mulch (i.e. shredded bark, compost). The mulch and berm make it easier to water the tree and reduce weed competition.
For most trees, staking is not recommended; however, if the tree trunk is not sturdy enough, use two stakes, one on either side of the tree, and give the trunk support for the first year only.
Right after planting, water the tree in by filling the bermed basin with water. This will settle the existing soil around the root ball. For the first week after planting, lightly water the tree every day (about one pint of water each day). The second week, water every other day with about one quarter of water. During week three, water every third day with two quarters of water. Week four and beyond, water once a week if needed. The goal is to wean the tree slowly off of supplemental irrigation, and get the root system large enough for the tree to thrive on natural rainfall.
REMEMBER: These are just guidelines. Use your index finger to check the soil moisture under the mulch. If the soil is cool to the touch, do not water. If it is warm and dry, then water. More plants are killed by over-watering than by under-watering.
Best wishes with your new spruce tree!