How to Make a Raised Bed - Knowledgebase Question

Easley, SC
Avatar for nyuk
Question by nyuk
August 21, 1998
We are beginning a raised bed garden at our primary school. Landscaping timbers have been donated to us to make our beds. We just don't know the best way to go about constructing the raised beds. How do the timbers stay togheter and what hardware do you recommend using? We want to make this as permanent a structure as possible and durable enough to withstand young, excited children working safely within these beds.

Answer from NGA
August 21, 1998
I have made beds with landscape timbers on several occasions. The key is to not only anchor them to the ground but also to each other as they tend to warp over time.

First level the area so the timbers will lay flat on the soil surface. Lay out the timbers, overlapping each layer at the corners like a log cabin. This will help strengthen the beds. Next drive large 6" spike nails into the timbers to anchor the second level to first (this can be repeated for a third or forth level if you want beds that high). This can be a tough procedure as the long nails tend to bend easily. To make it easier, drill pilot holes, slightly smaller than the nails, into the timbers before driving in each nail. Place nails in 3 places along the timber, but not at the overlapping corners.

After bed timbers are nailed together, drill 3/8" holes downward through the corners of the timbers where they overlap. Drive 3/8" rebar rods (available from many hardware stores) cut long enough to go through the timbers and into the soil a foot deep. Use a sledge hammer and don't allow any rebar to extend above the top timber for safety reasons. Repeat the rebar anchoring along the length of the beds (once for beds one timber long and twice for beds two timbers long).

Then fill the beds with soil and enjoy. Thanks for the question!

You must be signed in before you can post questions or answers. Click here to join!

« Return to the Garden Knowledgebase Homepage

Member Login:

( No account? Join now! )

Today's site banner is by Fleur569 and is called "Hello Pumpkins.."

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.