Time for an update...
Between monsoon storms and extreme heat every weekend progress has been a hit or miss proposition this summer.
I got the concrete underlayment cut installed and then attached a half bullnose form all around the edges. Then I cut reinforcement wire and some threaded rod and got it in place and it's ready for the concrete.
Once the concrete had set for a couple of days I stripped off the forms and sanded some areas that needed a little smoothing out. Then it cured for a couple of weeks and the finish electrical connections were made. Yesterday I finished the prep work and today I applied the acid stain.
Next up will be a sealer coat and then install the equipment.
